VIP Swivel connector

With a ball bearing which enables swiveling under load. Can be versatilily combined with all VIP components by means of the clevis connection using the adapter link. Insensitive to dirt owing to the sealed body. Connecting bolt and tensioning sleeve are pre-assembled. The BGR 500/DGUV-Regel 100-500 stipulates that lifting means never be used while in a twisted condition. This requirement is automatically met by the VWA because of the integrated ball bearing.

Hint: Install the VWA in such a way that the bending of the adapter link is not possible while in use. Not suitable for permanent use and swiveling under full load. Avoid bending of the appliance.

Article number: 7990723

VIP-Swivel connector VWA 20
AttributeweightValue7.28 kgValue16.05 lbs
AttributeNominal WLLValue16000 kgValue35300 lbs
AttributeTValue147 mmValue5-25/32"
AttributeAValue100 mmValue3-15/16"
AttributeBValue21 mmValue13/16"
AttributeCValue37 mmValue1-7/16"
AttributeDValue25 mmValue63/64"

Article number: 7100634

VIP-Swivel connector VWA 22
AttributeweightValue7.77 kgValue15.0 lbs
AttributeNominal WLLValue20000 kgValue44000 lbs
AttributeTValue147 mmValue5-13/16"
AttributeAValue102 mmValue4"
AttributeBValue23 mmValue7/8"
AttributeCValue37 mmValue1-15/32"
AttributeDValue28 mmValue1-1/8"